Products
-
Connector Cable for RBC7
Specifications:
Wire: UL 1015 10AWG Black
UL 1015 10AWG Red
Connector: SA50B8-H Gray
Terminal: PA5915-T 10-12AWG
OT Terminal: HRV5.5-5 OT Terminal with insulated yellow tip
-
Fuse assembly cable for RBC6
Specifications:
Wire: UL 1015 10AWG Black
Terminal: SL2500802-40C 250 female TAB:0.8MM 10-14AWG
F312 Terminal (7.8mm）ST2503128002-40C
Connector housing: F1250-05NN housing NL250HT housing
Fuse: 58V 60A Blue
-
16 PORTS C13 SMART PDU
PDU Specifications:
1. Input Voltage: single-phase 200~240V
2. Input Current: 24A, 50/60Hz
3. Output voltage: single-phase 200~240V
4. Outlet Sockets: 16 ports of C13 outlets (8 in Section A, 8 in Section B)
5. Output Current: 10A Per C13, 16A MAX Per Section, 24A Max Total
6. Each Section is protected by a UL489 2P 20A circuit breaker
7. Remote monitor and control ON/OFF of each port
8. Remote monitor input and per port current, voltage, power, power factor, KWH
9. Onboard LCD display with menu control
10. Ethernet/RS485 interface, support HTTP/SNMP/SSH2/MODBUS
11. Powder Coating color: RAL900
-
Module Power Connector DJL40
The D-series connectors are special products for modular power interfaces, which can be fully interchangeable with similar products in the industry. This series of products adopts single-leaf rotary double-curved surface innear spring plug holes and crown spring plug holes as contact parts, which makes the products have high dynamic contact reliability.
The contact of this series of products are treated with gold or silver plating; the plug is equipped with pins, and the socket is equipped with holes. This series of products usually has long, standard pins, and other types of pins to meet the different use requirements of users; It can also be customized according to the requirments of users.
Rated current: 125A(4#); 35A(12#); 5A(20#)
Rated voltage: 250V
Contact material: Copper, plate with gold&silver
Flammability: UL94 V-0
Working Temperature: -55℃-125℃
Withstanding Voltage: 2500V(Signal 800V)
-
Module Power Connector DJL35
The D-series connectors are special products for modular power interfaces, which can be fully interchangeable with similar products in the industry. This series of products adopts single-leaf rotary double-curved surface innear spring plug holes and crown spring plug holes as contact parts, which makes the products have high dynamic contact reliability.
The contact of this series of products are treated with gold or silver plating; the plug is equipped with pins, and the socket is equipped with holes. This series of products usually has long, standard pins, and other types of pins to meet the different use requirements of users; It can also be customized according to the requirments of users.
Rated current: 35A(12#); 5A(20#)
Rated voltage: 250V
Contact material: Copper, plate with gold&silver
Flammability: UL94 V-0
Working Temperature: -55℃-125℃
Withstanding Voltage: 1500V(Signal 800V)
-
125A CEE Panel mount socket (3P+N+PE)
Specification:
Rated current: 125A
Rated voltage: 480V
Number of poles: 5P
Clock position: 7h
Termination: Screw
Protection Type: IP67
Certification: CE
Standard: IEC 60309
Safety features: These connectors often include safety features to prevent accidental unplugging and are designed to ensure a reliable and secure connection.
-
12kV Bypass Load Switch
Specification:
1. Voltage: 10KV
2. Current: 400A
3. Rated short-time withstand current: 20KA/4S
4. Rated Active load breaking current: 400A
5. Protection grade of switch body: IP68
6. Application: The auxiliary components of the 10kv bypass non-power-off operation system are mainly used for the line opening and closing control of the operation system. Both sides are equipped with quick plug-in interfaces, which can be quickly connected with the self-locking quick plug-in type terminal of the bypass cable.
-
630A Control Panel Cabinet
Switchboard Specification:
1. Voltage: 400V
2. Current: 630A
3. MCCB: ABB T5S630 630A
4. Controller: ComAp IM1010
5. Protection degree: IP55
6. Application: Convert the direct current generated by the photovoltaic modules into alternating current that meets the requirements of the power grid, and control the stable connection between the photovoltaic system and the power grid to ensure the safe transmission of electrical energy to the grid.
-
Medium voltage switchboard
Switchboard Specification:
1. Voltage: 12KV
2. Current: 630A
3. Short-time withstand current: 20KA/4s
4. Rated short-time withstand current(peak): 50KA
5. Rated active load breaking current: 400A
6. Protection grade: IP68
7. Application: The auxiliary components of the 10kv bypass non-power-off operation system are mainly used for the line opening and closing control of the operation system. Both sides are equipped with quick plug-in interfaces, which can be quickly connected with the self-locking quick plug-in type terminal of the bypass cable.
-
Low voltage switchboard
Switchboard Specification:
1. Voltage: 400V
2. Current: 630A
3. Short-time withstand current: 50KA
4. MCCB: 630A (2 pcs)
5. One incoming line with cable lug and one outgoing line with cable lug, two sets of panel sockets with 630A to meet one incoming line and one outgoing line for use
6. Protection degree: IP55
7. Application: widely used for power supply protection of special vehicles such as low-voltage power vehicles, especially suitable for emergency power supply for important power users and rapid power supply in urban residential areas. It can significantly save the preparation time for emergency power supply and improve the safety of power supply.
-
Low voltage switchboard
Switchboard Specification:
1. Voltage: 400V
2. Current: 630A
3. Short-time withstand current: 50KA
4. MCCB: 630A (2 pcs)
5. One incoming line with cable lug and one outgoing line with cable lug, three sets of panel sockets with 630A to meet one incoming line and two outgoing lines for use
6. Protection degree: IP55
7. Application: widely used for power supply protection of special vehicles such as low-voltage power vehicles, especially suitable for emergency power supply for important power users and rapid power supply in urban residential areas. It can significantly save the preparation time for emergency power supply and improve the safety of power supply.
-
630A Busbar Clamp
Specifications:
Rated current: 630A
Rated voltage: 1000V
Short circuit current: 12KA, 1S; 10KA, 3S; 9KA, 4S
Busbar thickness: 3mm~10mm
Operating temperature: -40℃~125℃
Flammability: UL94V0
Features: 1) Parallel busbar connections, bare busbars, and busbars with coatings or insulation connections
2) Very compact clamping mechanism and extended handle, it can simultaneously connect multiple levels of parallel busbars, making it easier to connect to the busbars in a narrow space.
3) The handle can rotate 360° for easy operation, it can minimize the stress on the cables to the greatest extent, ensure a good connection with the busbar, and the connection method is more labor- saving and efficient.
4) Securely and quickly connect to the busbar: Use a torque wrench to securely and quickly fix/unfix the busbar clamp.
