Products
-
12kV Bypass Load Switch
Specification:
1. Voltage: 10KV
2. Current: 400A
3. Rated short-time withstand current: 20KA/4S
4. Rated Active load breaking current: 400A
5. Protection grade of switch body: IP68
6. Application: The auxiliary components of the 10kv bypass non-power-off operation system are mainly used for the line opening and closing control of the operation system. Both sides are equipped with quick plug-in interfaces, which can be quickly connected with the self-locking quick plug-in type terminal of the bypass cable.
-
630A Control Panel Cabinet
Switchboard Specification:
1. Voltage: 400V
2. Current: 630A
3. MCCB: ABB T5S630 630A
4. Controller: ComAp IM1010
5. Protection degree: IP55
6. Application: Convert the direct current generated by the photovoltaic modules into alternating current that meets the requirements of the power grid, and control the stable connection between the photovoltaic system and the power grid to ensure the safe transmission of electrical energy to the grid.
-
Medium voltage switchboard
Switchboard Specification:
1. Voltage: 12KV
2. Current: 630A
3. Short-time withstand current: 20KA/4s
4. Rated short-time withstand current(peak): 50KA
5. Rated active load breaking current: 400A
6. Protection grade: IP68
7. Application: The auxiliary components of the 10kv bypass non-power-off operation system are mainly used for the line opening and closing control of the operation system. Both sides are equipped with quick plug-in interfaces, which can be quickly connected with the self-locking quick plug-in type terminal of the bypass cable.
-
Low voltage switchboard
Switchboard Specification:
1. Voltage: 400V
2. Current: 630A
3. Short-time withstand current: 50KA
4. MCCB: 630A (2 pcs)
5. One incoming line with cable lug and one outgoing line with cable lug, two sets of panel sockets with 630A to meet one incoming line and one outgoing line for use
6. Protection degree: IP55
7. Application: widely used for power supply protection of special vehicles such as low-voltage power vehicles, especially suitable for emergency power supply for important power users and rapid power supply in urban residential areas. It can significantly save the preparation time for emergency power supply and improve the safety of power supply.
-
Low voltage switchboard
Switchboard Specification:
1. Voltage: 400V
2. Current: 630A
3. Short-time withstand current: 50KA
4. MCCB: 630A (2 pcs)
5. One incoming line with cable lug and one outgoing line with cable lug, three sets of panel sockets with 630A to meet one incoming line and two outgoing lines for use
6. Protection degree: IP55
7. Application: widely used for power supply protection of special vehicles such as low-voltage power vehicles, especially suitable for emergency power supply for important power users and rapid power supply in urban residential areas. It can significantly save the preparation time for emergency power supply and improve the safety of power supply.
-
630A Busbar Clamp
Specifications:
Rated current: 630A
Rated voltage: 1000V
Short circuit current: 12KA, 1S; 10KA, 3S; 9KA, 4S
Busbar thickness: 3mm~10mm
Operating temperature: -40℃~125℃
Flammability: UL94V0
Features: 1) Parallel busbar connections, bare busbars, and busbars with coatings or insulation connections
2) Very compact clamping mechanism and extended handle, it can simultaneously connect multiple levels of parallel busbars, making it easier to connect to the busbars in a narrow space.
3) The handle can rotate 360° for easy operation, it can minimize the stress on the cables to the greatest extent, ensure a good connection with the busbar, and the connection method is more labor- saving and efficient.
4) Securely and quickly connect to the busbar: Use a torque wrench to securely and quickly fix/unfix the busbar clamp.
-
PE630S (A/B/C/D type) Female Socket
Specifications:
Rated current: 630A
Rated voltage: 1000V
Contact Barrel Wire Size: 185~300mm²
Contact material: Silver plated copper alloy
Insulation material: PA66
Flammability: UL94-V0
Environment Temperature: -40℃~125℃
Protection grade: IP67
Color features: there is a brightly colored silicone color ring to avoid mis-insertion (1-blue 2-yellow 3-green 4-red 5-black)
Considering customers’ different installation angles, we design different types of A,B,C,D.
Material characteristics: the plastic material used in the connector is waterproof and fiber-reinforced material, which has the advantages of resistance to external impact and high toughness. When the connector is affected by external force, the shell is not easily damaged. The material used in the connector terminal is copper alloy, and the surface of the terminal is plated with a thick silver layer, which greatly improves the electrical conductivity of the connector.
Crown spring features: Both sets of crown spring are made of high-conductive copper material, which has the characteristics of high conductivity and excellent fatigue resistance.
Application: industrial emergency power generation equipment, such as swithboard, power-generating car, achieve quick connection or disconnection.
-
PE630 630A Panel Receptacle
Specifications:
Rated current: 630A
Rated voltage: 1000V
Contact Barrel Wire Size: 185~300mm²
Contact material: Silver plated copper alloy
Insulation material: PA66
Flammability: UL94-V0
Environment Temperature: -40℃~125℃
Protection grade: IP67
Color features: there is a brightly colored silicone color ring to avoid mis-insertion (1-blue 2-yellow 3-green 4-red 5-black)
Material characteristics: the plastic material used in the connector is waterproof and fiber-reinforced material, which has the advantages of resistance to external impact and high toughness. When the connector is affected by external force, the shell is not easily damaged. The material used in the connector terminal is copper alloy, and the surface of the terminal is plated with a thick silver layer, which greatly improves the electrical conductivity of the connector.
Crown spring features: Both sets of crown spring are made of high-conductive copper material, which has the characteristics of high conductivity and excellent fatigue resistance.
Application: industrial emergency power generation equipment, such as swithboard, power-generating car, achieve quick connection or disconnection.
-
PE630 630A Female Socket
Specifications:
Rated current: 630A
Rated voltage: 1000V
Contact Barrel Wire Size: 185~300mm²
Contact material: Silver plated copper alloy
Insulation material: PA66
Flammability: UL94-V0
Environment Temperature: -40℃~125℃
Protection grade: IP67
Color features: there is a brightly colored silicone color ring to avoid mis-insertion (1-blue 2-yellow 3-green 4-red 5-black)
Material characteristics: the plastic material used in the connector is waterproof and fiber-reinforced material, which has the advantages of resistance to external impact and high toughness. When the connector is affected by external force, the shell is not easily damaged. The material used in the connector terminal is copper alloy, and the surface of the terminal is plated with a thick silver layer, which greatly improves the electrical conductivity of the connector.
Crown spring features: Both sets of crown spring are made of high-conductive copper material, which has the characteristics of high conductivity and excellent fatigue resistance.
Application: industrial emergency power generation equipment, such as swithboard, power-generating car, achieve quick connection or disconnection.
-
PE630 630A Male Plug
Specifications:
Rated current: 630A
Rated voltage: 1000V
Contact Barrel Wire Size: 185~300mm²
Contact material: Silver plated copper alloy
Insulation material: PA66
Flammability: UL94-V0
Environment Temperature: -40℃~125℃
Protection grade: IP67
Color features: there is a brightly colored silicone color ring to avoid mis-insertion (1-blue 2-yellow 3-green 4-red 5-black)
Material characteristics: the plastic material used in the connector is waterproof and fiber-reinforced material, which has the advantages of resistance to external impact and high toughness. When the connector is affected by external force, the shell is not easily damaged. The material used in the connector terminal is copper alloy, and the surface of the terminal is plated with a thick silver layer, which greatly improves the electrical conductivity of the connector.
Crown spring features: Both sets of crown spring are made of high-conductive copper material, which has the characteristics of high conductivity and excellent fatigue resistance.
Application: industrial emergency power generation equipment, such as swithboard, power-generating car, achieve quick connection or disconnection.
-
PE530 530A Panel Receptacle
Specifications:
Rated current: 530A
Rated voltage: 1000V
Contact Barrel Wire Size: 150~240mm²
Contact material: Silver plated copper alloy
Insulation material: PA66
Flammability: UL94-V0
Environment Temperature: -40℃~125℃
Protection grade: IP67
Color features: there is a brightly colored silicone color ring to avoid mis-insertion (1-blue 2-yellow 3-green 4-red 5-black)
Material characteristics: the plastic material used in the connector is waterproof and fiber-reinforced material, which has the advantages of resistance to external impact and high toughness. When the connector is affected by external force, the shell is not easily damaged. The material used in the connector terminal is copper alloy, and the surface of the terminal is plated with a thick silver layer, which greatly improves the electrical conductivity of the connector.
Crown spring features: Both sets of crown spring are made of high-conductive copper material, which has the characteristics of high conductivity and excellent fatigue resistance.
Application: industrial emergency power generation equipment, such as swithboard, power-generating car, achieve quick connection or disconnection.
-
PE530 530A Female Socket
Specifications:
Rated current: 530A
Rated voltage: 1000V
Contact Barrel Wire Size: 150~240mm²
Contact material: Silver plated copper alloy
Insulation material: PA66
Flammability: UL94-V0
Environment Temperature: -40℃~125℃
Protection grade: IP67
Color features: there is a brightly colored silicone color ring to avoid mis-insertion (1-blue 2-yellow 3-green 4-red 5-black)
Material characteristics: the plastic material used in the connector is waterproof and fiber-reinforced material, which has the advantages of resistance to external impact and high toughness. When the connector is affected by external force, the shell is not easily damaged. The material used in the connector terminal is copper alloy, and the surface of the terminal is plated with a thick silver layer, which greatly improves the electrical conductivity of the connector.
Crown spring features: Both sets of crown spring are made of high-conductive copper material, which has the characteristics of high conductivity and excellent fatigue resistance.
Application: industrial emergency power generation equipment, such as swithboard, power-generating car, achieve quick connection or disconnection.
