China Wholesale Power Cord Connector Factories – Module Power Connector DJL125 – ANEN
China Wholesale Power Cord Connector Factories – Module Power Connector DJL125 – ANEN Detail:
This series products of contact with gold or silver plated surface treatment; the plug pinjack socket device, the terminal is press-fit, welding and board ( PCB) three type.
This series products of each type of pin usually have three lengths can be selected, respectively is the long pin, standard type pin and short pin, to meet the needs of users of different needs; can also be based on user requirements custom. Note: Spring crown material selection is the high elasticity^ high strength beryllium bronze. With spring crown structure with smooth arc contact face jack, plug is soft, and can ensure the maximum contact surface. Thus the spring crown structure of the jack contact resistance is low ( low pressure ), the temperature rise is small, and seismic resistance, anti-vibration ability is very high, so the spring crown structure of the products with high.
Technical Parameters:
| Rated current (Amperes) | 125A |
| Rated voltage(Volts) | 30-60V |
| Flammability | UL94 V-0 |
| Relative humidity | 90%~95%(40±2°C) |
| average Contact Resistance | ≤150mΩ |
| insulation resistance | ≥5000mΩ |
| Salt fog | >48H |
| Withstanding Voltage | ≥2500V AC |
| Operating Temperature Range | -40°C to +125°C |
| Mechanical life | 500 Times |
| Instructions for selection of contact parts
| Part Number | Type | Wire range | Current | Surface finish | Dimension |
| CTAC024B | Plug Pin | 6AWG | 125 | Silver plating |  |
| CTAC025B | Socket Pin | 6AWG | 125 | Silver plating |  |
| Outline and mounting hole size
Jack size
Plug size
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of China Wholesale Power Cord Connector Factories – Module Power Connector DJL125 – ANEN , The product will supply to all over the world, such as: Oslo, Australia, Johor, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Erin from Germany - 2018.10.09 19:07
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Dora from Slovenia - 2018.02.21 12:14
